Factory Price Access Control Full Automatic Bi-Directional Swing Turnstile For Hospital
PRODUCT DESCRIPTION
SN-SB01 is the minimum optical swing barrier gate, single working, lower air freight cost for sample order,
with LED indicator for access, and optical swing can be extended according to project requirement.
Advantage of swing gate is the channel width can be extend easily, support motor bike bicycle and wheelchair pass.
This swing barrier is the intelligent access management produced by our company, this equipment organically
integrate machinery electronics microprocessor control,and all kinds of different reading and writing equipment.
Through figuring all kinds of different reading and writing equipment,and adopting reliable performance safety
protection devices real-time alarm system, and direction indicator interface, realizing the access intelligent control
and management by the mutual coordination.
Main function and features
1. The stylish stainless steel column and clear toughened glass wing present a bright and concise design.
2. Bi-directional opening facilitates fast and safe access. It can also be integrated with recognition systems
for user friendly access control.
3. Featured with high security and stability, it’s suitable for banks, corporate headquarters, airports and leisure
venues.
4. Fault detection and alarm functions, easy to use and maintenance.
5. The running status can be programmed and controlled with the built-in keyboard on the main board.
6. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working
automatically within the prescribed time and reset again after the default delay (till fully reset).
7.Anti-breakthrough function. The gate is locked automatically until opening signal received.
8. Synchronization functions (for dual gate equipment).
9.Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user automatically.
10. Gate can be set as normally open or normally closed.
11. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Via dry contact signal)
12. Direction can be set as unidirectional or bidirectional.
13. The device can be connected to management computer to realize remote control and management.
14. LED direction indicator (optional)
15. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
16. Support infrared photocell for anti-pinch and reset function.
Technical Specifications
| DESCRIPTION | SPECIFICATIONS |
| Framework material | SS304/SS316 |
| Dimension | Colunm diameter:168mm, height 1050mm |
| Power supply | AC 220V/110V±10% |
| Motor voltage | DC24V (Brush-less motor) |
| Access device input | Relay Signal (Dry contact) |
| Optimal flow rate | at least 30 person/minute |
| Gate swing angle | 90 deg per side |
| Gate opening/closing speed | 1s |
| Reset time when power on | 3s |
| Arm material | acrylic/ SS304 |
| Arm length | around 730mm for one leaf |
| Arm max. bearing | 30KG |
| Working environment | Indoor/outdoor with shelter |
| Working temperature | -15°C~80°C |
| Relative humility | ≤95%, Non condensation |
| Communication interface | RS485 standard(distance ≤ 1200m) |
Product Application
The brush-less anti-collision swing barrier is an intelligent passage management equipment developed
and produced by our company. It integrates the exquisite mechanical transmission, microprocessor
control, voice and various reading and writing technologies. By configuring different reading and
writing equipment, the intelligent control and management of the passage can be completed. The
machine can realize the public channel's dissuade and access control
Product Tags:
|
|
Access Control Bi Directional Swing Turnstile Gate 24VDC For Hospital Images
|
